Sony DWZ B30BG

Sony DWZ B30BG

Brand: SONY
Product Code: SO DWZ BG30B
Availability:
In Stock
Price: $579.00

The guitar set version of the DWZ digital wireless microphone system offers high quality 24-bit / 48KHz linear PCM digital transmission and has a cable tone generator and three-way powering options for the exceptional versatility for portable and outdoor use.

Technical Specifications
Analog Output: XLR-3-32, balanced (x1) Phone jack, unbalanced (x2) Maximum output level -Balanced Output: +16 dBu -Main/Tuner Output: +8 dBu Reference output level -Balanced Output: -20 dBu -Main/Tuner Out: -28 dBu
Audio Attenuator Adjustment Range: 0 / 10 / 20 dB
Audio Delay: Narrow band mode: Approx. 3 ms / Wide band mode: Approx. 6 ms (Transmitter + Receiver)
Dynamic Range: MIC: 102 dB (A-weighted) INST: 98 dB (A-weighted)
Frequency Response: 10 Hz to 22 kHz
Input Connector: 3-pole locking mini plug
Input Impedance: 1.8 k ohms or more(MIC input)/ 1 M ohms or more(INST input)
Maximum Input Level: MIC: -22 dBu INST: +8 dBu (when attenuator level is 0 dB)
Reference Input Level: MIC: -58 dBu INST: -28 dBu (when attenuator level is 0 dB)
T.H.D: 0.03% or less (-38 dBu, 1 kHz input)
Transmitting Section
Antenna Type Internal monopole antenna
Carrier Frequencies 402.0 MHz to 2478.5 MHz Ch1: 2402/2478.5 MHz Ch2: 2421.5/2472.5 MHz Ch3: 2427.5/2475.5 MHz Ch4: 2424.5/2446.5 MHz Ch5: 2449.5/2469.5 MHz Ch6: 2405/2452.5 MHz Ch a: 2469.5/2474/2478.5 MHz Ch b: 2442.5/2447/2451.5 MHz Ch c: 2415.5/2420/2424.5 MHz Ch d: 2456/2460.5/2465 MHz Ch e: 2429/2433.5/2438 MHz Ch f: 2402/2406.5/2411 MHz
Modulation Method GFSK
Occupied RF Bandwidth 2.5 MHz
RF Power Output 10 mW (e.i.r.p.)
Transmitter Type Bodypack
Type of Emission F1D and F1E
Receiver Section
Antenna Type Internal monopole antenna
Receiver Type Compact (1 channel)
Receiving Frequencies 2402.0 MHz to 2478.5 MHz Ch1: 2402/2478.5 MHz Ch2: 2421.5/2472.5 MHz Ch3: 2427.5/2475.5 MHz Ch4: 2424.5/2446.5 MHz Ch5: 2449.5/2469.5 MHz Ch6: 2405/2452.5 MHz Ch a: 2469.5/2474/2478.5 MHz Ch b: 2442.5/2447/2451.5 MHz Ch c: 2415.5/2420/2424.5 MHz Ch d: 2456/2460.5/2465 MHz Ch e: 2429/2433.5/2438 MHz Ch f: 2402/2406.5/2411 MHz
Reception Type Space diversity
RF Sensitivity 30 dBμV or less
General
Battery Operating Time ZTX-B01: Approx. 10 hours of continuous use (25 °C (77 °F) ambient temperature, Sony LR6 (size AA) alkaline dry cell batteries) ZRX-C30: Approx. 3.5 hours of continuous use (25 °C (77 °F) ambient temperature, Sony square 9 V alkaline dry cell battery)
Dimensions* ZTX-B01: 63 × 80 × 20 mm (2 1/2 × 3 1/4 × 13/16 inches) (w/h/d) (excluding the antenna) ZRX-C30: 132 × 41 × 74 mm (5 1/4 × 1 5/8 × 3 inches) (w/h/d)
Mass ZTX-B01: Approx. 156 g (5.5 oz.) (including batteries) ZRX-C30: Approx. 205 g (7.2 oz.) (including battery)
Operating Temperature 0°C to 50°C 32°F to 122°F
Optional Accessories GC-0.7BMP
Power Requirements ZTX-B01: 3.0 V DC (two LR6 (size AA) alkaline dry cell batteries) ZRX-C30: External DC input: 12 V DC / 9 V DC, Dry cell battery: Square 9 V alkaline dry cell battery (6LR61)
Storage/Transport Temperature -20°C to +60°C -4°F to +140°F
Supplied Accessories Guitar cable (1) Belt clip (1) Belt clip screw (1) Cable clamp (1) AC adapter (1) Operating Instructions (1) CD-ROM (1)

  • Superb digital sound quality

    High-quality 24-bit linear PCM digital transmission offers pristine audio and a wide frequency range of 10 Hz to 22 kHz. Audio performance degradation that’s typical of conventional analogue wireless systems is avoided, as these packages are designed without the need for a compander.

  • Two RF modes for reliable transmission

    The DWZ Series provides two selectable RF modes. Simply choose the one that makes best use of your actual 2.4 GHz RF environment:

    Wide Band Hopping mode

    This mode reduces interference to other wireless equipment used in the same environment such as WiFi. There’s no need for advanced technical knowledge about radio frequency. Wide Band Hopping mode also supports additional error correction for more secure transmission*1. 

    Narrow Band Hopping mode

    This mode helps to avoid interference from other devices – for example, 2.4 GHz wireless remote controllers that are commonly used for lighting control. This enables frequencies to be coordinated when using multiple wireless systems simultaneously*2. 

    *1 Audio delay: Approx. 6 ms

    *2 Audio delay: Approx. 3 ms

  • Stable transmission

    Interruptions in reception (signal dropout) can be a problem with wireless microphone transmission systems. With the DWZ Series, however, dropouts are reduced to a minimum. Utilizing a space diversity reception system, stable reception is achieved by using dual-antenna inputs / reception circuits. These receive signals over two different paths and automatically select the stronger RF signal for output.

  • Multiple power supplies

    The ZRX-C30 receiver supports three types of powering. With the DC 9 V battery, the receiver can be used as a portable device for up to 3.5 hours, free from an AC adaptor cord and maximizing layout flexibility. Also, using this battery provides a simple solution for eliminating noise pick-up caused by the power supplies. For long-duration use, the receiver can be powered with the supplied AC 12 V adaptor, or the DC 9 V jack (for use with a power distributor).

  • Wired / wireless seamless operation

    The ZRX-HR50 is equipped with a Cable Tone Generator feature to simulate a wired tone when using wireless. There’s no need to adjust the equalizer setting on your amplifier when switching between wired and wireless. Simply set the Cable Tone Generator menu on the ZRX-HR50 display to match the desired wired tone.

  • Tuner out interface

    Tuner output is available for tuning. The ZRX-HR50 also has a transmitter-muting selector which provides a choice of connectors that can be muted.

  • Variety of interfaces

    The ZRX-HR50 features 3-way parallel audio output, ¼” TS phone (x2), and balanced XLR (x1).

  • Adjustable attenuator

    Adjustable transmitter attenuators allow you to select proper audio input levels from the microphone and instruments. The ZTX-B01 can be switched between instrument and microphone input.

  • Robust metal body

    The ZTX-B01 is made of strong durable metal. Metal construction supports reliable use in rough operating conditions.

  • Pedal board-ready with built-in antenna

    The ZRX-C30 has a light and compact design. It allows the receiver to fit into a pedal board system, or to be placed on top of a guitar amplifier. Also, the antenna is built-in to protect it from serious damage under rough handling conditions.

  • Variety of interfaces and LED indicators

    The ZRX-C30 features 3-way parallel audio output, ¼” TS phone (x2), and balanced XLR (x1). There are also LED Indicators for status monitoring for TX & RX.

  • Easy-to-use operation

    The ZTX-B01 features a muting function for tuning. In addition, a lock function protects from inadvertent setting changes.

  • Two AA battery operation

    The ZTX-B01 is powered by standard AA batteries to maximise flexibility and mobility.

DWZBG30B-Manual